Bicycle
Bicycle

 

Sort by
Show result
RM730.00
RM1,200.00

Features:

- It will NOT rust so you can ALWAYS show if off like the first day.

- INCLUDING ribbon and heat transfer aluminum plate artwork.

RM15.00

Carbon fiber is composed of extremely thin, bonded fiber made of carbon atoms. Thousands of carbon fibers are bundled together into cloth-like sheets. The sheets are combined with plastic resin. The sheets are placed into a mold with the fibers oriented in specific directions to create the desired characteristics of strength, stiffness or flexibility for the completed rim. Carbon fiber is used in wheels because of the high strength-to-weight ratio, low weight and the ability to mold the sheets into aerodynamic shapes. The subject of intense study in cycling, aerodynamics is the air flow over and around your wheels, bike and body as you ride. The goal of aerodynamics is to reduce the wind resistance called drag on your equipment, so the rider slices through the air and goes faster. At slow speeds, there is smooth air flow called laminar flow. As speed increases, the laminar flow turns to turbulent flow. There is a “sweet spot,” the point of reduced drag, when the air begins to tumble over and across the wheel surfaces in turbulent flow. The key to top carbon fiber wheel design is to produce rim shapes that optimize, capture and maintain the aerodynamic sweet spot for each rim depth.

Bill Shook started the engineering process on our carbon fiber rims from the inside, dictating the direction and lay up of the fibers to form stronger internal spoke beds for structural integrity and stiffness. He then moved to the outside of each wheel, designing unique features for aerodynamic performance to achieve the “sweet spot”. Carbon 38, Carbon 44 and Carbon 50 are the most challenging shapes because of their minimal surface area. Bill designed a gentle curved shape down to the spoke bed to minimizing drag by bringing the air flow back together without turbulence. Carbon 58 tubulars and clinchers have a recurve shape under the brake track. The recurve shape creates air pressure fluctuations causing a ripple effect to induce turbulent air flow to reduce drag at higher speeds. Carbon 85 tubulars are a semi disk shape with no spokes near the leading edge of the wheel. Bill designed the large, smooth carbon surface bringing air back together reducing cavitation behind the spokes. Carbon TT Disk is the ultimate in aerodynamics with lenticular skins to sustain the sweet spot for maximized power output.

RM5,800.00

Back by popular demand, the Carbon 58 Clinchers are better than ever with new 22mm wide rims. The Series 3 spoke system results in consistent spoke tension and equal load sharing for increased wheel durability. They are the best of both worlds, carbon in a clincher format to use every day or as race wheels with an aerodynamic advantage. They proved durable in testing at our test facility. Bill Shook selected the aluminum bead over an all carbon bead for improved braking, and to protect the tire and avoid flats. Stiff and compliant, they hold high cruising speed with less effort. Carbon 58 wheels roll smoothly and are notably comfortable, a surprise from a deep profile rim.« Road Bike Action Magazine. Carbon 58 Clinchers are an all around performer at an excellent price point to carry you to the win.

RM5,000.00
  • Breakaway Screws
  • Fusion In-Mold Polycarbonate Shell
  • Goggleguide™ Adjustable Visor System
  • Integrated Breakaway Camera Mount
  • MIPS-Equipped
  • Overbrow Ventilation™
  • TAG™ Fit System
  • Wraparound Protection™
  • X-Static® Padding

    https://www.youtube.com/watch?v=XWH13HUz4mg

RM1,020.00

Ardea Versus: Versus road saddles combine fi'zi:k’s proven technology, design and materials and offers something new to meet some riders’ needs: a central relief channel.
The Ardea Versus joins the Versus road range along with the Arione, Antares and Aliante, and brings a new shape option with its gently curved profile, medium-width nose and weight-saving cutaway rear section to complement the ergonomic 7mm Versus Channel running along its length.
It features a song but light Polybutylene PBT shell and fi’z:k’s familiar Manganese rail, along with glossy thigh-glides to minimise riding friction.

RM315.00

Features

Featherweight Webbing with Slimline™ Buckle, Roll Cage internal reiforcement

Construction

In-Mold polycarbonate shell with EPS liner, Thermoformed SL reinforcement

Fit System

Roc Loc Air

Ventilation

26 Wind Tunnel vents with Internal channeling

 

RM1,090.00

MICHELIN TS

Aramide beads, designed to be flexible and light.

When designing their cycle tyres, MICHELIN use two types of bead, flexible beads (TS) and rigid beads (TR).

The flexible beads invented and developed by MICHELIN are made exclusively of aramide fabric, which is also to be found in bulletproof vests.
This textile fabric has a very great resistance to extension whilst being very lightweight.

These beads therefore have the special features of being very light and very strong, which reduces the overall weight by 40 to 70 grams per tyre.

MICHELIN high performance Road and Mountain Bike tyres are all equipped with flexible beads.

RM130.00
RM156.00

MICHELIN TS

Aramide beads, designed to be flexible and light.

When designing their cycle tyres, MICHELIN use two types of bead, flexible beads (TS) and rigid beads (TR).

The flexible beads invented and developed by MICHELIN are made exclusively of aramide fabric, which is also to be found in bulletproof vests.
This textile fabric has a very great resistance to extension whilst being very lightweight.

These beads therefore have the special features of being very light and very strong, which reduces the overall weight by 40 to 70 grams per tyre.

MICHELIN high performance Road and Mountain Bike tyres are all equipped with flexible beads.

RM130.00
RM156.00

Be visible and stay safe!

RM35.00

Xtrada 3 is perfect for recreational mountain bikers looking to up their game and expand their horizons. Inspired by our hard tail cross-country race bikes; the model features light weight and stiff alloy cross-country frame which allows the bike to be maneuvered easily, giving better control, and improved performance. With 27.5” wheels, the bike positions the rider in a more comfortable riding position, offering a well-balanced combination of easy-rolling performance, and confidence-inspiring traction when rolling on the trail. Polygon is also a UCI (Union Cycliste Internationale) participating team as Polygon UR.

  • Alutech hydroformed alloy frame
  • SR Suntour XCM HLO fork
  • Full Shimano Altus 27 Speed
  • Entity Sport handlebar, stem and seatpost
  • Tektro hydraulic disc brakes
  • Araya DM-650 rims
RM2,000.00

- Multifunctional wireless bicycle speedometer, includes all vital functions for novices and pros alike.

- Real-time display of the current speed, odometer, trip distance, maximum speed, average speed, elapsed time, clock, etc.

- Engineering plastic and electronic components material with LCD, good durability and have a clear view of the data.

- Imported sensors to provide stable performance, and accurate speed.

- Durable and water resistant for use in all conditions.

- Easy to install firmly with mounting accessories.

- Battery: 1 x CR2032 button battery, 1 x 23A / 12V F23 battery in transmitter(Included).

- Ideal accessory for bicycle training.

RM86.00
RM150.00
RM160.00
  • Defined center-ridge tread for low rolling resistance
  • Low profile, densely spaced knob configuration
  • Multiple effective braking and climbing edges
  • Capable side knobs
RM150.00
RM160.00
RM2,075.00
RM2,600.00